Zio smartmedia card reader driver install#
Zio smartmedia card reader driver drivers#
Zio smartmedia card reader driver software#
Zio smartmedia card reader driver Pc#

Then the drive will open and I can locate the Olympus folder. Lots of times I think the computer locked up, and Light goes out on the Zio reader, and it takes a good while for theР”Вrive to 'open'. Reader, and after double clicking on the 'removeable drive F', the If you take really large pictures, there might be a good bit of lag time before the computer opens the drive.Р”Р„re you sure the computer is locking up? I also have the Zio Lots of times I think the computer locked up, and then the drive will open and I can locate the Olympus folder.

Putting the card in backwards might freeze up the machine.Р”Р„re you sure the computer is locking up? I also have the Zio reader, and after double clicking on the 'removeable drive F', the light goes out on the Zio reader, and it takes a good while for the drive to 'open'. I would also like to mention, that you must make sure that the SM Card is plugged in with the contacts facing away from the Zio logo on the reader. The USB Hub has a game controller, and a scanner permenantly connected to it, and I am using the second edition of Win98. I have never run into a problem with the reader locking up the machine. I put the card into the reader, then I plug the reader into a USB Hub. I have installed the software, and always use a hot connect. I have been using the Zio for about three months now. If you are using Windows 98, check to see It is probably wise to turn the computer off before inserting theР”В¬able into the USB port. Nothing works, I have to shut the system down, and reboot, and then 'drive H' made for the smart reader, then the system locks up, Into the Zio reader, Go into 'my computer' double click on the new Of the cable, Now I insert the 32 mb, memory card from Olympus, The usb port on the cpu, then I pluged the ZIO into the other end

Zio smartmedia card reader driver software#

The first thing IР”Вid was installed the software then I pluged in the usb cable into Trouble, with it maby somebody can help me out. I recently bought the Zio usb smart reader, and I am having

Zio smartmedia card reader driver Pc#

For cards in Digicams, you usually have to disconnect from the computer (using eject option) before attempting to remove the card - this is because the link from PC to card is active - removing the card obviously disupts that connection. I would also check (from the manual) whether the card needs to be in the drive BEFORE you connect it to the PC. If not then you may well need to have the card in the drive connected at boot time.

Zio smartmedia card reader driver drivers#

However you should check the manual for the drivers or device to see whether it allows hot-swapping (sometimes called 'auto connect'). I don't have a ZIO nor know if their drivers have any unique features. This is only my personal opinion from using various USB devices. This is because of how windows browses drives by changing file attributes (not doing this may subject the media to the possibility of corruption). Before taking a card out of the reader, you should select 'eject' by right clicking on the drive under 'my computer'. Now if the drivers are correct then plugging in the ZIO will cause it to show (if you haven't left it in during the reboot). After installing the drivers you need to reboot the machine to enable it to finish its configuration.

Zio smartmedia card reader driver install#

If you had to install the drivers, then I assume that you have W98/W98SE and not W2K/WMe.